This is exactly what I was looking for. Behringer Europower is awesome and was the best investment I ever made.
why is my behringer europower pmp 3000 not turning on?
Okay. i came into my garage today and my board was on. the volume to monitor 1 was very low and the monitor 2 volume was all the way down. my setup is... i have a umd? i think that is what type of cord it is called (really bione compared to regular cords) plugged into input a (on the back of the board) and no input in b so its Behringer Europower setup is mono it is on monitor mode not bridge mode meaning that input a gives 300 watts with 8 ohms the end of input a cord is plugged into my peavy 400 watt 8 ohm impedance so there shouldn't be a problem. now when i turned up monitor 1 and all i heard was the high frequencies nothing in the subwoofer (sounded like it was blown but it shouldn't be) so i turned off my board (in hopes that it will work if i reset it) then i turned it on and i saw smoke coming from the fan so i turned it back off. I then waited till the smoke cleared and i tried to turn it back on and it wont idk know why so i checked the fuse and it was not blown any ideas???? (sorry for the long description i just had to tell of everything that happened so that it can be effectivley fixed)
Powered by Yahoo! Answers
