If you are like me, you need a little bit on information before making a buying decision. Here’s a description of Microphone Preamp for you.
Imagine for a moment you are looking all over online for Microphone Preamp. Wait. are you? If so, then listen up. I was in your shoes once, so I’m going to save you the hassle of researching Microphone Preamp any further. Take a look at the prices I’ve found for you and then you decide if you’re ready to buy Microphone Preamp right now.
What is the diference between a microphone with two leads and one with three leads?
I am building a Microphone Preamp small transmitter and have two microphones, a three lead one and a two lead one, I know that one may have an inbuilt preamp or maybe the third wire id just for ground. Does anyone know the difference?
Powered by Yahoo! Answers
Post from: Pro Audio Microphones
Microphone Preamp Interrelated Article
The guitar amp has a speaker built in – why do you need to add more speakers? Otherwise your plan will work.
check if your connections are correct. the sequence must be: PC speaker output socket connected to the preamp’s input socket then the output of the preamp to an external speaker. be sure your speakers are capable of handling the preamp’s total output signal.
No, the iMic is just a audio usb adapter. It doesn’t have the necessary RIAA equalization that’s required to properly play vinyl. When a recording is put on vinyl, the highs and lows (treble and bass) are toned down to help keep the needle in the groove, and those highs and lows are replaced during playback by an RIAA filter built into most home stereo amplifiers. That equalization is built into the “Final Vinyl” software so of course you can rip your vinyl using imic and the sofware, but the iMic alone can’t do it.
Your mic is probably broken you should buy a new one.
You can get a decent sound out the 100-200 dollar preamps. I would pay more than 30 bucks though, as there probably is quite a difference in quality. I personally have never used one that cheap. If you want to hear something that was recorded with a 100 dollar fast track preamp, go to my myspace: http://www.myspace.com/virgilblack89. The drums are a loop but everything else was recorded, and ps, I used an sm58 too. Good luck.
……..|¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨………….|……….2 points ……..|||”|”"__……..|__________________|||_|___|)<……..!(@)’(@)”"”"**!(@)(@)****!(@)
All you need is a XLR to USB interface – this will allow you to connect your mic to the computer via USB:http://www.amazon.com/LightSnake-STUSBXLR10-USB-Microphone-cable/dp/B000H7O9ZI/ref=sr_1_5?s=musical-instruments&ie=UTF8&qid=1279809866&sr=1-5
A microphone preamp is usually an external device. There is no built in Microphone preamp inside pro tools, its usually found on your hardware or audio interface. I will need much more detailed description of what you’re usuing in order to help you. You should consider joining a community for recording enthusiasts like http://www.audioneeds.com – it’s a great community filled with industry professional recording engineers who are willing to help you with any questions or problems you have. Also, there are tons of articles and how to’s … and it’s all free… I’m sure it’ll help you. Good luck
it wont damage it at alli plugged my synthesizer into a really shitty guitar amp and it works just fineno i dont think so, your better off buying a cheap one if your not like a serious musician
I recommend brushing up on your recording chops. It never hurts to learn more techniques that may be preventing you from getting great sound quality. There are a number of books on recording techniques that can be found at Amazon ( http://www.amazon.com/gp/search?ie=UTF8&keywords=home%20recording&tag=homerecorder-20&index=blended&linkCode=ur2&camp=1789&creative=9325 ). It’s possible that it may be your recording technique and monitoring environment that are giving you the bad results, and not the preamp alone. A few nice preamps for around your budget would be the Alto Voiceplus-D ( http://www.homerecorder.com/product.php?pid=518 ) and the Phonic T8100 ( http://www.homerecorder.com/product.php?pid=121 ). I recommend paying attention to the levels on input on your recording software and making sure they’re at a good level, not too hot to distort and not too low. Also, be sure that you’re using a good mic for your voice. A preamp means nothing if the mic is no good and if that mic doesn’t bring out the good qualities of your voice. I could go on, but education and experience with help you further. Hope this help!
A preamp or mixer is used to boost the signal levels of a microphone to that needed by a power amplifier to produce full output power. It’s more of a volume issue than a “quality” one although many preamps also include tone controls. You have a decent mic so the quality is already there. Don
Have a look at these Microphone Preamps http://www.misupply.com/List-Name-Product-Type-Microphone-Preamps-c63+4294893916+7.music