Here are some pictures of Midi Interface and a detailed description of Midi Interface. I hope that you find these links helpful but you can always use the search link on the right to find more Midi Interface or anything else you need.
Is a usb 2.0 audio interface w/ midi an alternative to buying a better sound card?
Like the Emu 0404 USB audio/MIDI interface. does that act as your sound card, or bypass it or something? or do you still need a powerful sound card?
Powered by Yahoo! Answers
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 | ![new-alesis-usb-midi-to-usb-cable-midi-interface-[3697]](http://pcproaudio.com/images/e/380413348878_0.jpg "Midi Interface Assistive Information") |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
 |  |  |
Nope. all right.Akash!
US-122 Owner’s Manual
The question you have asked suggests you have a misunderstanding about the requirements to run Pro Tools software. The direct answer to your question:Pro Tools works with ANY brand, make or model of MIDI interface as long is the MIDI interface is compatible with the computer your using. The answer I think your really looking for:To open/launch the Pro Tools digital audio software you are required to have a certain audio interface hardware, which type of audio interface depends on which version of Pro Tools 8 you want to use and your recording needs. There are 3 “families” of Pro Tools 8.0, depending on which one you are using, different hardware is required.Pro Tools HD 8.0 = Core/Accel cards and Digidesign HD Interfaces.Pro Tools LE 8.0 = Digidesign “LE” interfaces including: 003, 003Rack, 003Rack+, Mbox2 Pro, Mbox2, Mbox2 Mini, Mbox2 Micro, Mbox. Pro Tools M-Powered 8.0 = Any one of the M-Audio brand interfaces listed from this following link:http://www.digidesign.com/index.cfm?langid=1&navid=54&itemid=26145When you buy a Pro Tools HD or LE hardware system/interface it comes with the software. When you buy Pro Tools M-Powered it is sold separately from the M-Audio hardware interfaces. Both Pro Tools M-Powered and HD also require an iLok license to work, it’s a small USB “dongle” that gives you authorization to run the software, it must be plugged into a USB port on the system and is used in place of a authorization code. (it comes with the system when you purchase it..)So, those are the requirements and your choices..
Yes as long as your EZ150 Yamaha has the Midi interface port.
Generally I’d say MOTU and M-audio. these work with most software packages (except MOTU doesn’t work with Protools – everything else though). It just depends on the amount of inputs/outputs you require. i’ve used a Tascam US1641 in the past which has 8 mic inputs, 2 guitar line inputs and a further 4 line inputs, but it only cost around £250. Hope this helps
I think the M-Audio Uno is good enough since it is relatively good at its price. You will need to connect the mpc to your speakers. The sound will not come out automatically, so you need to set it at the program setting.
The simplest way I can put it, is that its an electronic sound library which can only be accessed by a midi controller. Midi messages are the inputs that are sent by controllers the library, and the output is sound. I have an Axiom 61 keyboard which makes absolutely no sound on it own, therefore I plug it into my computer, run it with Ableton (my recording studio software full of midi effects in its library), and when I press a key on my Axiom is sends a message to the software to use the corresponding effect then to play it back to me aurally (this process cause latency issues, but thats something else). Midi controllers arent only for making sounds, but to control the program itself. For example Dj’s use midi controllers like the Hercules DJ Console Rmx which controls the Dj software for an external source (you can use programs like Virtual Dj or Traktor without having to ever touch your computer).
Does your computer have what used to be called a ‘gamecard’ – I don’t know how old the PC you are using is…Anyway, many older game cards had a midi controller chip built in , but you need to buy a cable that would plug into the port for the joystick so as to adapt it to a midi in and out…Pretty cheap if this is what you need – maybe $20 if…
You only need one MIDI link between the keyboard and the computer. It’s designed so you can run a daisy chain of keyboards and drum machines off a single controller, in one port and out the other port to the next device.
“What is MIDI” has already been asked and answered here dozens of times:http://answers.yahoo.com/search/search_result;_ylt=?scope=all&category=0&fltr=_en&question_status=all&answer_count=any&date_submitted=all&crumb=zoJGwOTUuer&p=%22what+is+midi%22&orderby=rankI’d like to think of it as electronic sheet music written for a device that can read it. A piece of sheet music tells you which notes to play, how long to hold each note, what volume, what tempo, what instrument to sound, etc. A MIDI is a set of instructions for doing all of that, in the form of numeric data. You can save it as a .mid file, and/or send it from one device to another.>>I THINK it is when you can plug in the musical instrument into a computer and >>use the keyboard to record the song. Is this right or not?It depends on what you mean by this. Plugging a guitar into a PC and recording the audio signal as a file for playback, is not MIDI.>>(I am not the best with computers so please use few technical words).That was a cute line to hear older people say…back in the 1990s.
Very good question. I know that Pro Tools 9 can work with tons of interfaces. But not sure on that specific one. You could ask some of the Pro Tools experts at the Pro Tools forums here: http://www.audioneeds.com – I’m sure you will find a solution there.
Snaps, crackles, and pops are not likely to be caused by low memory, they are more likely caused by the sound card or the software. (at least when there are no rice crispies involved)
Your best and most inexpensive source would be eBay. You would need to have a Paypal account to pay for the adapter. Here’s a link to one for $8.95 + free shipping:http://cgi.ebay.com/USB-to-MIDI-Keyboard-Interface-Converter-Cable-Adapter_W0QQitemZ350220816032QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item518ac98ea0You should receive it in about 5 days after purchase.
Cool Record Edit Pro can record any sound passing through any line of your sound card. For example, you can record sound being played back by an external program(including the playback of Internet broadcasts and Internet-telephony conversations), sound from a microphone, an external LP, cassette, CD/DVD player, AM/FM/Satellite radio, etc. http://coolrecordedit.com/download.html
If you plan to record midi’s I would suggest getting a great sound sound along with an analog/digital interface. As far a suggestion M-Audio is an excellent choice. Way better than your Dell.http://www.m-audio.com/products/en_us/Delta1010LT-main.html
Don’t confuse yourself on this one. If your keyboard has a USB port, plug it into the computer and get software that makes sound. If it only has MIDI In/Out, then you will need something like the m-audio midisport 1×1 so the MIDI info can still go into the computer through the USB cable. In this case you still need software to get more sounds.You mentioned computer, so I left out external MIDI devices, however, just in case, you can buy a sound module. (Look up sound module) These are usually not cheap though and for cost effectiveness, I recommend purchasing software.What needs to happen:1. The keyboard you have needs to send out MIDI signal (which is only information and not sound in any way) to the computer.2. The MIDI signal when it is received on the computer needs to have a virtual instrument receive the MIDI signal and turn it into sound3. The sound plays out of your computer speakers or sound interface (sound card)What will NOT happen:1. A device will load sounds onto your piano2. MIDI will make sound by itself3. The built-in sounds will travel from your keyboard directly to the computer over USBThere are outliers in here and your piano may have extra storage, but I doubt it and you didn’t mention what you were using, so we can’t help you there. Yes, if you need a MIDI interface to connect to the computer, then you want that plugged in prior to the pianoWith the use of software, there is literally no limit to the sounds you can get from your piano.That last question doesn’t make sense I’m afraid, so unless you want to clarify, or the question you had wasn’t answered, I’d let that one die and read up a little on what MIDI is. (No offense intended, I just really don’t know what you mean by what type of MIDI you should use)Cheers
yes on Q 1.Q2?its ok, PROTOOLS is GREAT.
the hissing sound may very well be the driver, and it has to be reinstalled. as a general rule of thumb, any computer hardware disassembled and left alone would remain static and unchanged until a time it’s reassembled again. Once done so, there is a chance it might cause a glitch in one of the devices, usually due to dusty contacts. you may want to remove the sound card an clean it up before installing it again.Second part, just reinstall the driver. it happened to me once before.