I cannot tell you how happy I am with my Audio Bfa. Man, this thing is getting better and better as I learn more about it.
What does an audio amplifier do in a transmitter?
In transmitter schematics, usually there is an audio amplifier. I would like to know its purpose. Audio Bfa Does simply amplifying the audio input create a stronger signal for transmission? So, basically, does increased audio power equate to increased range for the transmitter?I didn't know there was a difference, so thanks. Could someone explain what an amp would do both in AM and FM transmitters?
Powered by Yahoo! Answers
Audio Field recorder. What’s your budget?Zoom H2, H4… Alesis also makes several audio-only field recorders. So do Edirol, Tascam, M-Audio, Sony Professional, Marantz and many others make audio field recorders, too.When you import the video for editing, import the audio from the field recorder. Sync the audio. Mute the audio that came in with the video…
You can demux the media files with a program such as MKVextract minus the unwanted audio track. Here is the link where it can be downloaded – http://www.videohelp.com/tools/MKVExtractGUI. If the file isn’t an mkv there are other programs that work with avi’s but I haven’t used them very much.
Audio cards talk to the processor normally through the PCI bus (outboard) and through the I/O Controller. There is no destinct processor to device controller, such as with Video that might have an “Intel 82865GPEP Processor tp AGP Controller” (in the case of a Dell Intel laptop). An audio device driver for an onboard audio card is normally easily installed (as you would think). An “Audio controller” is a device that is viewable on an audio device driver once installed. Simply find the audio device (go to device manager, then expand the “Sound, video and game controllers” tree list. You will find a unique brand audio device there. For example, on my laptop “SigmaTel C-Major Audio”. (you can ignore the standard “Audio/Video Codecs”, or “Legacy” Drivers and devices.)If your device is not properly installed or is disabled it will have a red “x” through its icon. Double click the icon. You can click the “Properties” tab and view its “Audio devices”, which will include the Audio controller.Other than the standard device manager (that you find throug the “Hardware” tab of the System Properties applet– accessed through the Control panel or by right-mousing the “My Computer” icon) there is no other device manager for accessing “controller chips” on the motherboard.If you find your device has been disabled, you may be able to re-enable it and then cause it to work. If none of this works, you may consider booting to SAFE MODE, removing the audio device from the device manager and reinstalling it completely. That often cleans up partial installs or failed installs of device drivers.hope that helps
With Windows Movie Maker, support add your audio to a video files to video..After you edit your video, save it as WMV format.
I’ve used one and it worked well. Certainly optical >> coax will give you superior sound to analog. And it will be surround.
free audio books at podiobooks.com or ones in public domain LibriVox.orgIf you want to try audible.com use one of the links to try first book free like the one from starshipsofa.comIf you might also want to check out starshipsofa.com and escapepod.orgemusic also has audio books not free but no DRMAlso the podiobooks and several other free books can be found for free in the podcast section of itunes
The only think that works in all players is regular CD-audio, where you burn a CD with tracks. Some players will read MP3 files off of a CD-R, but since we don’t know what kind of players you have, this is not guaranteed. CD-R’s are cheap, you could just try it and see.Very ancient CD players may not work well with CD-R, but that would have to be something really old, like from 1990.
1 – Click to start2 – Select Programs 3 – Select Accessories 4 – Select System Tools 5 – system restore6 – Select the set point restore Choose Next 7 – Sevihalk long box, type the name of the restore point To remember when the device malfunction and operated 8 – Choose Next Then choose OK.
I use a software called Instant CD & DVD Burner which can be downloaded from http://www.download.com. Check your total files size first so that it will not exceed the cd capacity. If you have lots of mp3 files to burn, maybe you need more than 1 cd. Hope this helps
Very easy for u with E.M. Youtube video download tool.It works very well and easy to use.Just download youtube video, then convert the video to any other video or audio/(1)Install and run E.M. Youtube Video Download Tool.(2)Play the video on the webpage.when the video start to play , it will be sniffed and downloaded automatically.http://www.google.com/search?hl=en&q=%22E.M.+Youtube+video+download+tool%22&btnG=Google+Search(1)It can search any flash video from many websites at the same time ;(2)Download youtube video fastly and easily;(3)Convert flv video to any audio include MP3, wma,wav,ac3,mmf,amr,ogg,aac…, to any video formats include 3gp,avi,wmv, mpg,mpg4,asf,swf,h264,mov,jpg, that can be support by PSP,iPod,iPhone,Apple TV video,iTune,MP3,MP4,Zune,Cellphone,Digit… camera,DV,CD/DVD/VCD/SVCD.(4)Burn flv video to CD/VCD/SVCD/DVD disc easily and fastly;(5)It still can repiar and capture RTMP video streams.(6)Total video player that can play any video or audio.
I recommend you to use Leawo DVD Creator + free dvd to avi converter solution. These two software can help you convert videos between avi and dvd easily. Leawo DVD Creator can burn avi to dvd easily and quickly. And Leawo Free dvd to avi converter can rip dvd to avi in several steps.Here free download Leawo DVD Creator:http://www.google.com/search?hl=en&newwindow=1&q=leawo+dvd+creator&aq=f&aqi=g2&oq= Leawo Free DVD to AVI Converter for Windows here:http://www.google.com/search?hl=en&newwindow=1&q=leawo+dvd+to+avi&aq=f&aqi=&oq= dvd to avi converter for MAC:http://www.google.com/search?hl=en&q=site%3Aleawo.com+DVD+Ripper+for+Mac&btnG=Search&aq=f&aqi=&oq=
You should be fine with mono leads if there is one lead per channel.The combined stereo lead would only be essential if there was a just a single output socket. You will also be fine if you use 2 X stereo leads as the sockets will just read from one of the channels in this case.
Go to your device manager.You can get to it via Control Panel or by right-clicking your Computer/My Computer icon and selecting Properties where it will be on one of the tabs.Once you have the device manager, locate the Sound, video and device controllers node and see if your device is listed there.If you device is listed there or it’s listed and has an exclamation symbol against it, then right-click on the device – you have two options.You can select to “Update Driver” and follow the wizard or you can “Uninstall” the device.If you choose to “Uninstall” the device, you’ll need to reboot your computer. When the computer reboots, it should detect the device is new and then ask you to reinstall the device using the “Add New Hardware” wizard.Follow the Add New Hardware wizard, again, selecting the driver files that you have already used. One of the above solutions should resolve your issue.
you can use cyberlink product powerDirect to edit both videos..there are so many video editing software but this is one of the most from the top 10.you can remove the lousy audio and add the good one on it….there is also a good way to get the good audio as a mp3 file to add in the good video..you can use VCD Cutter for taking that video…,add that video in VCD Cutter, mark from begin to the end and ->save as->in the column file type ->select .Mp3 -> save.hope this will benefit for you….thankswww.anzu4u.tk
The money went on the transport costs, catering and life support. Making a video of the event was secondary and it only needed to be good enough to show the USSR that the USA had made it to the Moon. Transmission of the signal would have been limited by the available power for the transmitter, which would have been a small low power device, the received signal would be amplified on reception at the Earth station, along with all the noise. So that’s why the signal is poor.However, not all of the pictures shown of the moon landing would have come from the moon. I find it very difficult to accept that after making all the arrangements to send someone to the moon with the associated costs and risks, that a back up system was not in place, just in case the equipment failed and the moon transmission could not be read. Yes, it is ‘conspiracy theory’ but I believe that man has been to the moon and the questionable material shown, ie the flag waving in the wind, is part of the back up material. Before you dismiss this as rubbish, ask yourself, ‘What would you do to ensure pictures were definitely available under any failure conditions?’
Use this Website-http://mediaconverter.org/index.phpclick on the one that says-Convert music or Video by URLThen go to youtube and copy the URLPaste it on the space provided Click Next Scroll down on where it says “Select a File Type”Click on MP3you don’t need to do anything else so click NextClick Next againIt should be downloading Then click the Download now button Save it somewhere you will be able to find laterOpen ItunesMake sure to be on Music LibraryClick on File Click on Importfind the saved file then click Open and it should be in your itunes library
Which tape camcorder?Digital8 and MiniDV are digital tape formats that connect to your computer with a firewire cable between the DV port on the camcorder and the firewire port on the computer to import the video and the audio.VHS-C, VHS, Beta, Hi8 and others are analog – to transfer the video and audio to your computer, you need a capture card or analog/digital converter from Pinnacle (Dazzle) or Canopus (ADVC55).If all you want is the audio and do not need the video, ALL camcorders come with an AV cable that you would normally use to connect the camcorder to a TV to watch the playback. Instead of connecting to a TV, connect the audio RCA jacks to your computer’s mic jack – you will need an RCA female to 1/8″ (3.5mm) adapter. Some camcorders are mono-audio; most newer ones do stereo. (so adjust the RCA female side of the adapter to have two).Audacity is a powerful Open Source audio manipulation application that can import that audio and export as many different audio file types – including MP3.
degreedirectory.org/article_directory/Engineeringwww.sae.edu/media/Atlanta/pdf/3345_SAE_Atlanta_CourseBoth of these two sites will give you information on ACCREDITED COURSES that will have you working and knowing what youre doing. DONT go ANYWHERE that isnt ACCREDITED to teach you PROPERLY!!!aes.org This website is the audio engineering societies members page for professionals AND students. Go and BECOME a member over there and READ everything THEY say.The best way to learn ANYTHING is to do it yourself.Youre on the internet, so just read everything. Start here:Creative.comCakewalk.comand read their articles about recording. Then do this:OPEN your Favourites and make a new folder, call it SOUND INFO and add the creative page into it.Thenmake another folder called SOUND EQUIPMENT.Everytime you come across something you want to keep or study put it into the INFO folder so you can come back and study it.Everytime you find a word or a term you dont know, SEARCHBAR it and add that page to the folder as well.NOW for the best thing you can possibly do. PHONE all the local recording studios and TELL them you want to work for FREE, that you just want to LEARN and WATCH and you’ll MAKE COFFEE and sweep floors and wash their cars if they’ll let you sit in. (I own a studio and I’d PAY you to watch me work if you made a half decent cup of coffee! Sorry, I’m in Australia…)also theres a lot of pages over at ehow.com but a LOT of the information is YEARS out of date so read with caution!And finally this:www.recordingconnection.com/glossyAThat website has a GLOSSARY OF ENGINEERING TERMS Learn the words, searchbar everything you dont.AND DONT YOU DARE JOIN UP TO PAY ANYONE ON THE WEB TO TEACH YOU THIS SUBJECT! YOU GO WHERE YOU GET A PIECE OF REAL PAPER AT THE END OF IT!!! Dont make me sorry I gave you the glossary page!!!Hope I helpedCat(Engineer/producer/studio owner)
i totally agree