Ok, let us first start with a review of Pro Amplifier:
I was impressed with Pro Amplifier plain and simple. When I placed my order, I had in in my hands within 3 days and the price was great. The key is looking for a seller with over a 100 feedback rating on Ebay. I’ve even included the top Ebay listings to Pro Amplifier in this review to make it even easier on you.
which amplifier is best for my speakers?
hey everyone i own two wh15 precision audio 600watt speakers with 8 ohm see here http://www.precisionaudio.com.au/precision/speakers.htmi now need an amp powerful enough to use these.which one of the below would be best and would it be best sound quality and loud!http://cgi.ebay.com.au/SKYTEC-PRO-STEREO-PA-DJ-POWER-AMPLIFIER-2-X-750WATT_W0QQitemZ120235118544QQihZ002QQcategoryZ58718QQssPageNameZWDVWQQrdZ1QQcmdZViewItemhttp://cgi.ebay.com.au/E-SYSTEMSPRO-POWER1000-AMPLIFIER-2x500W-WITH-X-OVER-NEW_W0QQitemZ220212659061QQihZ012QQcategoryZ58718QQssPageNameZWDVWQQrdZ1QQcmdZViewItemhttp://cgi.ebay.com.au/SOUNDSTANDARD-KARAOKE-2-CH-STEREO-PA-AMPLIFIER-1800W_W0QQitemZ220215214530QQihZ012QQcategoryZ58718QQssPageNameZWDVWQQrdZ1QQcmdZViewItemhttp://cgi.ebay.com.au/Pyramid-PA1000X-Rack-Mount-1000-Watt-PA-Amp-Amplifier_W0QQitemZ230233038050QQihZ013QQcategoryZ14983QQrdZ1QQssPageNameZWD2VQQcmdZViewItem?_trksid=p1638.m122i Pro Amplifier really like the last one....which will be best for my speakers?thx
Powered by Yahoo! Answers
WOW – Technical Pro amps are inexpensive amps made in China. It probably will work ok. If you are a professional DJ or musician, I would get a better amp.Behringer makes some great cheap amps:http://www.zzounds.com/item–BEHEP1500
put the bass and treble on 7 then the mids on 5. Reverb is nice, but too much will sound crappy. Keep a cleaner tone by leaving the gain down and he volume up.
This should work if you have it connect right. I just looked at the manual – first off make sure the attenuators are ALL THE WAY up clockwise. You do not need a preamp because the ipod puts out plenty of signal for the amp.You will need a standard 3.5mm to 1/4 inch cable:http://www.zzounds.com/item–HOSCMP15You can use a 3.5mm to rca cable too with these adapters:http://www.radioshack.com/product/index.jsp?productId=2062455&cp=After connecting the ipod turn it up pretty loud and if your speakers are connected right, that amp should get pretty loud. Make sure you are wiring the each speaker to it’s own pair of binding posts on the back of the amp. Home stereo speakers are not as efficient as DJ speakers so that will cut down on the volume too.
yeah for house systems it will be, but for car audio no.
If you are using a Euro rack, you should be able to clean up sound, even with bad amplifier signal noise, using Spyntraax Pro (I think that is how it’s spelled). there is a free demo version with tutorial on the manufacturer’s site.It does a great job, is intuitive and the free version should suit you fine unless you are doing real high end clean stuff.
What is a kam amplifier? Do you have a make and model number of it? Make and model of the speakers too would help.
if your amp is 1 ohm mono and not 1ohm stereo check your owners Manuel now with the subs if they are cvr or compVR and dual 4 ohms you’ll need to connect all + connect together then to the + of amp then do the same for the – connections if the subs are just comps they are more likely 4ohms and doing the same as above will only get u a 2ohm load
macbooks are made for music but i dont work with macs
i would say about 500watts RMS X 1 @ 2ohms because it has two 35amp fusesits far from CEA-compliant so it does not put out its advertised RMS wattage and the wattage it does put out is more than likely going to be distorted and distortion over time is the main cause of speaker damage
The amp is rated at 1000W into 2 ohms, so it should be sufficient for your needs. The listing doesn’t state if this is a stereo amp, but from the picture it looks like it has two channels. It may be possible to bridge both channels to even more wattage. Either way, you have a lot of power for a subwoofer.Good luck!
What’s the brand and model of your amp?maybe we can help a little more.I think Sum is for hooking up a subwoofer to your amp, it would turn a stereo track into a mono (sum).